Product features
Interchangeable processing tools
The source describes replacing the agitator with a dispersion disc to suit the intended laboratory operation.
Quick-change mounting
A quick-change chuck supports installation and removal of the appropriate tool between compatible process trials.
Small-batch development
The equipment is intended for laboratory formulations and comparison of processing conditions.
Cooling-vessel option
A jacketed milling vessel can be selected where the media-grinding configuration requires temperature management.
Applications
Coating formulations
Evaluate powder incorporation and dispersion in small liquid batches before developing a larger process.
Ceramic slurries
Compare suitable ceramic suspension preparations while tracking contamination and flow behavior.
Material research
Assess dispersion or the supported media-grinding setup with clearly identified tools and sample conditions.
Evaluating results
Dispersion quality
Check remaining agglomerates or particle distribution with a method appropriate to the formulation.
Flow and heating
Record viscosity and temperature during trials, especially when changing tool or speed.
Repeatability
Repeat the chosen procedure with the same vessel, tool position, fill and material preparation. Use equivalent sampling and measurement conditions throughout the comparison.
These are evaluation points for a sample trial, not measured results for a specific sample. Confirm performance under your actual operating conditions.
How it works

Tool selection
Install the supported dispersion disc or grinding agitator for the planned operation.
Mechanical processing
The selected tool moves the charge; with a compatible media setup, contact also provides grinding action.
Measured adjustment
Compare samples after the defined cycle and adjust conditions based on the intended dispersion or grinding endpoint.
Construction and configuration

Quick-change chuck
The mounting arrangement permits tool changes with the drive safely stopped.
Processing vessel
Match vessel dimensions and working fill to the tool and intended batch.
Optional cooling jacket
Confirm the jacketed vessel and external coolant requirements when processing heat-sensitive samples.
Technical specifications
Compare the listed specifications and configurations. Scroll horizontally to view the complete table.
| Configuration | Details |
|---|---|
| Listed speed range | 1,400–2,800 rpm |
| Tool options | Dispersion disc or compatible grinding agitator |
Tell us your sample or process requirements so we can confirm the appropriate specification and configuration.
Confirm the selected model, power supply, contact materials and operating conditions before ordering. Performance depends on the material and process.
