Product features
Adjustable roller spacing
Move the idler roller within its permitted range to accommodate compatible jar diameters and stable support.
Replaceable jar materials
Use separately selected jars and media for different samples, contamination limits and dry or wet procedures.
Small-batch experiments
The QM laboratory range supports powder preparation and formulation trials where each jar can be handled individually.
Convenient changeover
Removable jars simplify sample identification and cleaning between runs, with total loaded weight checked before use.
Applications

Ceramic glaze preparation
Compare glaze formulations using consistent jar dimensions, loading and milling duration while observing slurry condition.

Electronic or magnetic materials
Choose contact materials around sensitive elements and compare grinding conditions on representative small samples.

Mineral research
Prepare metal-bearing or non-metallic mineral samples after checking feed suitability and the intended analytical method.
Evaluating results
Particle-size response
Compare size distributions or sieve residues under defined conditions to judge whether further milling is useful.
Cleaning effectiveness
Inspect jars, lids and media after changeover and use a blank sample where carryover could affect results.
Repeatability
Repeat the same charge and jar arrangement to evaluate variation; main-roller speed is not the jar's rotational speed.
These are evaluation points for a sample trial, not measured results for a specific sample. Confirm performance under your actual operating conditions.
How it works

Position the jar
Check jar diameter, length and total mass, adjust roller spacing, and place the secured jar correctly.
Drive the jar surface
The powered roller turns the jar by contact, lifting and tumbling the enclosed grinding media through the sample.
Remove after stopping
Stop the rollers before removing the jar, collecting a sample or preparing the next experimental charge.
Construction and configuration

Powered and idler rollers
The support rollers establish jar contact and spacing; effective length and diameter compatibility must both be checked.
Drive and load limits
The permitted jar load includes the vessel, grinding media and sample, rather than the sample alone.
Jar and lid assembly
Choose a compatible closure and contact material for the liquid, powder and cleaning method used in each trial.
More product images





Technical specifications
Compare the listed specifications and configurations. Scroll horizontally to view the complete table.
Specification table 1
| Parameter | QM-5 | QM-15 |
|---|---|---|
| Dimensions / weight | 730×415×260/32kg | 845×435×270/43kg |
| Motor specification | Y0.37~483 | Y0.75~483 |
| Frequency inverter | 0.4kw/220v | 0.75kw/220v |
| Main roller speed range | 60-570rpm±10 | 60-570rpm±10 |
| Effective roller length | 260mm | 340mm |
| Adjustable roller spacing | 120mm | 140mm |
| Station spacing | 260mm | 340mm |
| Maximum load per jar | 35KG | 80KG |
Confirm the selected model, power supply, contact materials and operating conditions before ordering. Performance depends on the material and process.
