Product features
Laboratory EP format
The listed EP configuration prepares small brittle samples before finer milling or analysis.
Adjustable discharge
The stated discharge setting can be adjusted within the documented equipment limits; check the actual output by screening.
Defined motor supply
The product table identifies a compact motor and electrical arrangement for verifying installation requirements.
Staged preparation
Coarse reduction can be followed by splitting or milling according to the laboratory sampling procedure.
Applications
Ore sample preparation
Reduce suitable small ore pieces before the subsequent grinding and analytical workflow.
Building-material samples
Evaluate brittle material such as limestone or shale while checking feed dimensions and condition.
Comparative preparation
Use a documented gap and feed procedure when comparing different laboratory sample batches.
Evaluating results
Discharge size
Sieve representative output and record the oversize fraction for the selected setting.
Sample carryover
Inspect and clean the crushing zone between batches, using blanks when required by the analysis.
Recovered mass
Weigh collected material and retained residues to assess losses during coarse preparation.
These are evaluation points for a sample trial, not measured results for a specific sample. Confirm performance under your actual operating conditions.
How it works

Jaw motion
The drive cycles the moving jaw against the fixed jaw to change the crushing gap.
Compression
Brittle feed is reduced as it is compressed between the jaw surfaces.
Discharge
The return movement releases smaller pieces through the lower opening for collection.
Construction and configuration

Jaw crushing zone
Confirm jaw contact materials and their condition for the sample and contamination limits.
Feed and gap
Match the feed to the laboratory unit’s opening and use the documented discharge adjustment.
Drive and collection
Check the actual motor supply, mounting space and receiving arrangement against the EP product table.
More product images





Technical specifications
Compare the listed specifications and configurations. Scroll horizontally to view the complete table.
Specification table 1
| Product name | Overall dimensions | Weight | Motor power | Speed | Moving jaw speed | Feeding particle size | Discharge particle size |
|---|---|---|---|---|---|---|---|
| jaw crusher | 730x510x570mm | 115 kg | 0.75 kW / 220V | 1400 rpm | 560 rpm | <35 mm | ≤8 mm granularity adjustable |
Confirm the selected model, power supply, contact materials and operating conditions before ordering. Performance depends on the material and process.
