Product features
Primary size reduction
The XPC uses a fixed and moving jaw to prepare hard rock and ore for subsequent processing.
Adjustable discharge opening
A mechanical discharge adjustment allows the crushing stage to be matched to the next milling or screening operation.
Deep crushing chamber
The jaw chamber holds feed through repeated compression, with capacity depending on the material and selected machine.
Replaceable wear components
Jaw plates and related wear parts can be inspected and maintained as part of a planned service routine.
Applications
Ore pre-crushing
Reduce mineral samples before a ball mill or other fine-grinding stage, retaining representative material throughout preparation.
Rock and aggregate trials
Prepare limestone, basalt or similar rock for screening and comparative materials tests under controlled feed conditions.
Laboratory sample preparation
Match the feed opening and discharge setting to the sample quantity and downstream analytical preparation method.
Evaluating results
Feed suitability
Check the largest particles and hardness before processing; oversize feed must be addressed before the crushing stage.
Discharge size
Measure the crushed distribution and oversize fraction using the same sampling method for each setting.
Jaw wear
Track jaw-plate condition and possible wear contamination when preparing samples for sensitive chemical analysis.
These are evaluation points for a sample trial, not measured results for a specific sample. Confirm performance under your actual operating conditions.
How it works

Eccentric drive
The motor and belt drive rotate an eccentric shaft, producing the moving jaw's reciprocating motion.
Compression stroke
As the moving jaw approaches the fixed jaw, material is compressed, split and rubbed within the chamber.
Discharge stroke
When the jaw retreats, sufficiently reduced material drops through the lower opening and the cycle repeats.
Construction and configuration

Fixed and moving jaws
The opposing jaw plates form the crushing chamber and are the main surfaces contacting the feed.
Toggle and return assembly
The toggle transfers force while the return arrangement supports repeated opening of the chamber.
Discharge adjustment
Confirm the shim arrangement and permitted setting range for the supplied XPC model before changing the opening.
More product images

Technical specifications
Compare the listed specifications and configurations. Scroll horizontally to view the complete table.
| Configuration | Details |
|---|---|
| Crushing chamber | Fixed and moving jaws |
| Discharge | Adjustable opening |
| Model series | XPC |
Tell us your sample or process requirements so we can confirm the appropriate specification and configuration.
Confirm the selected model, power supply, contact materials and operating conditions before ordering. Performance depends on the material and process.
