Product features
Compact sample preparation
The JC60X95 reduces small brittle samples before finer milling, keeping coarse crushing within a laboratory workflow.
Adjustable discharge
The jaw gap can be adjusted to suit the next preparation stage; verify the resulting size distribution experimentally.
Contact material selection
Manganese steel, zirconia and tungsten carbide jaw options are described; choose according to hardness and contamination limits.
Accessible controls
The documented assembly includes a gap adjustment wheel, frequency converter and touchscreen; confirm the supplied configuration.
Applications
Ore preparation
Prepare small mineral samples for subsequent grinding, splitting and analysis under a documented sampling procedure.
Building material studies
Evaluate limestone, shale and similar brittle feeds, checking feed shape as well as maximum particle size.
Research workflows
Use controlled coarse reduction when comparing materials that require different jaw contact surfaces.
Evaluating results
Discharge distribution
Sieve representative output and check the oversize fraction at the selected jaw gap.
Carryover
Run cleaning blanks between samples to assess contamination from retained particles and jaw wear.
Repeatability
Compare recovered mass and size distribution across repeated samples at the same settings.
These are evaluation points for a sample trial, not measured results for a specific sample. Confirm performance under your actual operating conditions.
How it works

Eccentric drive
A belt and pulley drive the eccentric shaft, moving the movable jaw toward and away from the fixed jaw.
Compression stroke
The narrowing chamber compresses and rubs the feed between the two jaw surfaces.
Release and discharge
The return stroke opens the lower gap, allowing reduced particles to leave the crushing chamber.
Construction and configuration

Jaw assembly
Fixed and movable plates define the crushing zone; inspect their condition before comparing successive batches.
Gap adjustment wheel
Use the documented adjustment mechanism to set the discharge opening with the machine safely stopped.
Feed and collection
The hopper directs feed into the chamber and the collection box receives crushed samples for transfer.
More product images







Technical specifications
Compare the listed specifications and configurations. Scroll horizontally to view the complete table.
Specification table 1
| Device model | JC60X95 |
|---|---|
| Motor power | 0.75 kW |
| Equipment voltage | Single phase 220V 50 Hz |
| Jaw crushing speed | 560 rpm |
| Control method | touchscreen |
| production capacity | 50 kg/h is confirmed based on the specific gravity of the material. |
| Feeding particle size | <35 mm |
| Discharge particle size | ≤8 mm granularity adjustable |
| Jaw plate material | High manganese steel, zirconia, carbide |
| Equipment dimensions | About 690x510x590mm |
| Equipment weight | About 105 kg |
Confirm the selected model, power supply, contact materials and operating conditions before ordering. Performance depends on the material and process.
