Product features
High-speed dispersion disc
The rotating disc applies shear and circulation while incorporating suitable powders into liquids.
FS model choices
The listed family offers different motor ratings and lift strokes for selecting a practical batch arrangement.
Liquid formulation focus
The equipment supports mixing, dissolution and dispersion studies for compatible coatings, inks and adhesives.
Adjustable tool position
A lifting and guiding arrangement positions the processing tool; confirm the actual mechanism and vessel fit.
Applications
Coating preparation
Evaluate powder incorporation and dispersion in a representative liquid formulation.
Ink and pigment mixtures
Compare agglomerate breakup, flow and color-related measurements under documented processing conditions.
Adhesive development
Assess mixing of suitable viscous liquids while monitoring temperature, entrained air and operating load.
Evaluating results
Dispersion endpoint
Measure remaining agglomerates or the relevant fineness indicator rather than relying on run time alone.
Air incorporation
Observe foam or bubbles and compare them under different fill and tool-position conditions.
Thermal and flow changes
Record temperature and viscosity through the trial to identify a workable operating window.
These are evaluation points for a sample trial, not measured results for a specific sample. Confirm performance under your actual operating conditions.
How it works

Tool positioning
Place the supported vessel and lower the disc to the validated working position.
Disc-driven flow
High-speed disc rotation generates circulation and local shear in the liquid-containing batch.
Controlled incorporation
Add compatible ingredients according to the trial procedure and assess dispersion at defined intervals.
Construction and configuration

Drive and shaft
Select motor power and the shaft arrangement for the proposed batch and material behavior.
Dispersion disc
Choose a supported disc diameter and verify clearance within the actual mixing vessel.
Lift and controls
Confirm lift mechanism, travel, speed selection and any process-specific electrical configuration before ordering.
Technical specifications
Compare the listed specifications and configurations. Scroll horizontally to view the complete table.
Specification table 1
| Model specifications | Host power (KW) | Maximum speed (r/min) | Dispersion disc diameter (mm) | Lifting stroke (mm) |
|---|---|---|---|---|
| FS-4 | 4 | 1400/2800 | 50-200 | 700 |
| FS-3 | 3 | 1400/2800 | 50-200 | 600 |
| FS-2.2 | 2.2 | 1400/2800 | 50-200 | 550 |
| FS-1.5 | 1.5 | 1400/2800 | 50-200 | 500 |
| FS-1.1 | 1.1 | 1400/2800 | 50-200 | 500 |
| FS-0.75 | 0.75 | 1400/2800 | 50-200 | 500 |
Confirm the selected model, power supply, contact materials and operating conditions before ordering. Performance depends on the material and process.
