Product features
Adjustable speed
Electronic control varies the working speed and provides a recorded setting for comparative laboratory dispersion trials.
Interchangeable heads
Choose a compatible working head around sample volume and process, rather than choosing operating speed alone.
Stainless contact surfaces
The source specifies stainless steel in the material-contact zone; verify compatibility with the formulation and cleaning method.
Removable head connection
The coupling permits head removal for cleaning or configuration changes according to the equipment instructions.
Applications
Liquid-liquid formulations
Compare emulsification of compatible research formulations using a defined procedure for assessing the dispersed phase.
Powder incorporation
Investigate solid-powder wetting and dispersion in liquids while considering viscosity and working-head size.
Tissue preparation trials
Assess suitable homogenization procedures with sample amount, head selection and temperature sensitivity documented before analysis.
Evaluating results
Dispersion uniformity
Inspect residual agglomerates or phase distribution using a measurement method appropriate to the intended application.
Temperature rise
Record temperature together with speed and duration to identify a suitable operating window for the sample.
Repeat preparation
Repeat the same head, vessel and sample arrangement to assess consistency, rather than comparing speed alone.
These are evaluation points for a sample trial, not measured results for a specific sample. Confirm performance under your actual operating conditions.
How it works

Position the head
Prepare the vessel and charge, then set the working head in the instructed position before operation.
Generate shear
The motor drives the rotor relative to the stator, creating repeated shearing and mixing within the working-head assembly.
Evaluate the fluid
Stop and inspect the processed sample, using dispersion and temperature measurements to guide further work.
Construction and configuration

Motor and controller
The drive establishes operating speed; observe the prescribed load and intermittent-duty conditions for the model.
Rotor-stator assembly
Head geometry determines the local processing action and must match the batch size and fluid properties.
Coupling and surfaces
Inspect the connection and clean accessible contact parts between formulations, checking retained material and wear.
More product images

Technical specifications
Compare the listed specifications and configurations. Scroll horizontally to view the complete table.
Specification table 1
| NameModel | JZJ200 | JZJ200-SH (digital display) | JZJ300-SH (digital display) |
|---|---|---|---|
| Speed r/min | 300-23000 | 300-23000 | 300-23000 |
| Processing volume ML | 30-1500 | 30-1500 | 100-13000 |
| Input power w | 280 | 280 | 510 |
| Output power w | 200 | 200 | 300 |
| Overall dimensionsmm | 220*340*600 | 210*310*700 | 210*310*700 |
| Working head configuration MM | Φ12 Φ18 | Φ12 Φ18 | Φ28 Φ36 |
| Working methods | intermittent | intermittent | intermittent |
| power supply | AC220V/50 Hz | AC220V/50 Hz | AC220V/50 Hz |
| Rated torque n.cm | 83 | 68 | 68 |
Confirm the selected model, power supply, contact materials and operating conditions before ordering. Performance depends on the material and process.
