Product features
Rotor-stator processing
The working head creates strong relative motion in the liquid for mixing, dispersion and emulsification trials.
Adjustable speed
Variable speed allows processing intensity to be changed according to the formulation and the selected working head.
Stator choices
Small-hole, medium-hole and elongated-hole stator heads are described for matching different processing requirements.
Recirculating action
The working head draws material into the rotor region and returns it to the vessel for repeated treatment.
Applications
Emulsion development
Compare compatible cosmetic or chemical emulsions while measuring droplet distribution and stability after the run.
Coating dispersions
Evaluate wet pigment or filler mixtures with attention to viscosity, circulation and the suitability of the working head.
Food formulation trials
Assess compatible liquid formulations with appropriate product-contact materials and cleaning procedures for the intended use.
Evaluating results
Droplet or particle size
Measure the dispersion at recorded intervals to determine whether additional treatment changes the relevant distribution.
Separation tendency
Inspect the processed mixture after a defined rest period rather than equating immediate uniformity with stability.
Temperature and flow
Track warming and bulk circulation so increased speed does not obscure an unsuitable formulation or vessel arrangement.
These are evaluation points for a sample trial, not measured results for a specific sample. Confirm performance under your actual operating conditions.
How it works

Draw material inward
The rotating head pulls liquid and suspended material into the rotor region from the surrounding vessel.
Pass the narrow gap
Relative rotor and stator motion applies shear, impact and liquid-flow interaction to the passing material.
Repeat the circulation
Material exits through the stator and circulates through the vessel, undergoing further treatment during the run.
Construction and configuration

Working-head options
Select the stated stator opening pattern against the feed condition and the required dispersion or emulsion.
Drive and controls
Confirm the motor, speed range and control arrangement for the supplied RHJ configuration.
Vessel matching
The listed processing volume must be checked against viscosity, liquid level and the circulation created by the head.
More product images


Technical specifications
Compare the listed specifications and configurations. Scroll horizontally to view the complete table.
Specification table 1
| NameModel | RHJ300-D-1 | RHJ300-SH (digital display) |
|---|---|---|
| Speed r/min | 200-11000 | 200-11000 |
| Processing capacity L | 40 | 40 |
| Input power w | 510 | 510 |
| Output power w | 300 | 300 |
| Overall dimensionsmm | 250*650*720 | 250*650*720 |
| Rated torque n. cm | 34.1 | 34.1 |
| Working head configuration MM | Φ70 | Φ70 |
| Stator configurationmm | 5,20,50 | 5,20,50 |
| power supply | AC220V/50 Hz | AC220V/50 Hz |
Confirm the selected model, power supply, contact materials and operating conditions before ordering. Performance depends on the material and process.
