Product features
Vibratory media action
The BZM uses moving grinding media to apply impact, compression and shear to the material.
Stainless steel contact surfaces
The source describes polished stainless steel contact parts; confirm the grade and cleaning compatibility for the supplied configuration.
Enclosed grinding chamber
The chamber contains the charge during processing; verify dust handling and seals for the actual material.
Sample-led selection
Fibrous, tough or moist feeds require representative trials to establish suitable operating conditions.
Applications
Plant-derived powders
Evaluate size reduction of suitable botanical materials while tracking temperature and physical changes.
Fibrous material studies
Test how the chosen media and run time affect fibers, clumping and recovered particle distribution.
Chemical or food research
Match contact materials and cleaning methods to the formulation and the intended analytical requirements.
Evaluating results
Particle distribution
Measure the full distribution after grinding rather than treating a stated mesh range as a guaranteed outcome.
Temperature and integrity
Monitor heating and assess any material property that must be preserved during preparation.
Recovery and cleaning
Check retained powder, wear contribution and carryover between representative batches.
These are evaluation points for a sample trial, not measured results for a specific sample. Confirm performance under your actual operating conditions.
How it works

Chamber excitation
An external vibration source moves the grinding chamber and accelerates the media within it.
Impact and shear
Media movement produces repeated impacts and lateral contact forces on the sample.
Process tuning
Adjust the validated loading and operating conditions to emphasize reduction or mixing for the specific material.
Construction and configuration

Grinding chamber
The chamber holds the selected media and sample; inspect contact surfaces and seals before processing.
Media selection
Balls, rods or other specified media change the contact pattern and require material compatibility review.
Access and acoustic cover
The described enclosure supports access for cleaning and noise reduction; confirm the delivered assembly.
Technical specifications
Compare the listed specifications and configurations. Scroll horizontally to view the complete table.
Specification table 1
| Model | BZM-10 | BZM-20 |
|---|---|---|
| Public work volume (L) | 10 | 20 |
| Processing capacity (kg/h) | 1~4 | 2~10 |
| Feed particle size (mm) | ≤3 | |
| Grinding fineness (mesh) | 120~1200 mesh (44~3.1um) | |
| Crushing range | Hardness: ultra-microfiber, high toughness, high grinding, homogenization, mixing | |
| Cooling method | water cooling | |
| Voltage(V) | 220 or 380 | 220 or 380 |
| Machine material | Stainless steel | Stainless steel |
| Power (kw) | 3 | 4 |
| Overall dimensions (mm) (length × width × height) | 1250×800×1600 | 1300×850×1600 |
| Weight (kg) | 380 | 580 |
| application | laboratory | Laboratory and pilot plant |
Confirm the selected model, power supply, contact materials and operating conditions before ordering. Performance depends on the material and process.
