Product features
Parallel jar positions
Four stations allow separate jars to process samples during a shared run under a documented operating setup.
Arrangement choices
The source includes single-tier models and a selected two-tier configuration for matching available space and access.
Contact-material flexibility
Separate jars allow compatible vessel and media materials to be chosen for different sample requirements.
Model-specific capacity
Jar diameter, maximum loaded mass and roller spacing are specified by model and should be checked together.
Applications

Formulation screening
Compare ceramic slurry or new-material formulations under equivalent jar, charge and operating conditions.

Replicate sample preparation
Prepare repeat samples and compare the consistency of results across jars in the same processing run.

Media combination trials
Evaluate permitted media and vessel combinations for electronic, magnetic or metallic powders with defined contamination limits.
Evaluating results
Between-jar consistency
Measure each jar's output separately and compare fineness or composition with its recorded charge and media.
Rolling behavior
Observe jar rotation and support contact at the intended loaded mass before treating stations as equivalent conditions.
Recovery and carryover
Inspect each jar after discharge and cleaning so results are not confused by residue from previous formulations.
These are evaluation points for a sample trial, not measured results for a specific sample. Confirm performance under your actual operating conditions.
How it works

Arrange the jars
Load and label separate compatible jars, then set them on the rollers within the permitted geometry and weight.
Drive jar rotation
The main roller transfers motion to the vessel, causing media and sample to tumble inside.
Compare recovered batches
Stop the machine and recover each sample separately, retaining its process record and analytical identity.
Construction and configuration

Station configuration
Select the actual GQM-4 arrangement rather than assuming all four-station models share the same frame layout.
Jar and roller geometry
Check outside diameter, support spacing and loaded mass against the chosen model's limits.
Electrical supply
The listed four-station variants differ in drive rating and supply phase, so confirm installation requirements.
More product images









Technical specifications
Compare the listed specifications and configurations. Scroll horizontally to view the complete table.
Specification table 1
| Model | GQM-2-5 | GQM-2-15 | GQM-2-20 |
|---|---|---|---|
| Dimensions / weight | 950X480X685/59KG | 1130X550X690/80KG | 1350X650X690/92KG |
| Motor model / power | YE2-80M2-4B3 /0.75KW | YE2-90S-4B3 /1.1KW | YE2-90L-4B3 /1.5KW |
| Standard power supply | 220V、50/60HZ | 220V、50/60HZ | 220V、50/70HZ |
| Main roller speed (rpm) | 50~410±10 | 40~365±10 | 40~340±10 |
| Hand crank | Optional | Optional | Optional |
| Guard | Optional | Optional | Optional |
Specification table 2
| Model | GQM-4-5 | GQM-4-5(two levels) | GQM-4-15 | GQM-4-20 |
|---|---|---|---|---|
| Dimensions / weight | 950X660X690/70KG | 950X480X870/(92KG) | 1130X800X690/95KG | 1350X820X690/122KG |
| Motor model / power | YE2-80M2-4B3 /0.75KW | YE2-80M2-4B3 /0.75KW | YEZ-90L-4B3 /1.5KW | YE2-100L1-4B3 /2.2KW |
| Standard power supply | 220V、50/60HZ | 220V、50/60HZ | 220V、50/6OHZ | 380V、50/60HZ |
| Main roller speed (rpm) | 50~410±10 | 50~410±10 | 40~365±10 | 40~340±10 |
| Hand crank | Optional | Optional | Optional | Optional |
| Guard | Optional | Optional | Optional | Optional |
Specification table 3
| Model | GQM-8-5 | GQM-8-15 |
|---|---|---|
| Dimensions / weight | 950X660X960/106KG | 1130X800X960/152KG |
| Motor model / power | YE2-90L-4B3 /1.5KW | YE2-100L1-4B3 /2.2KW |
| Standard power supply | 220V、50/60HZ | 380V、50/60HZ |
| Main roller speed (rpm) | 50~410±10 | 40~365±10 |
| Hand crank | Optional | / |
| Guard | Optional | / |
Confirm the selected model, power supply, contact materials and operating conditions before ordering. Performance depends on the material and process.
