Product features
Horizontal mixing vessel
The CH mixer uses a trough-shaped vessel for dry powders or suitable damp and paste-like mixtures.
Paddle agitation
A shaft-mounted paddle moves the batch through the vessel to combine unlike ingredients.
Stainless contact parts
The source describes stainless steel product-contact surfaces for selection according to the formulation.
Batch discharge choices
Discharge arrangements vary across the listed models; confirm manual or powered tipping with the required batch size.
Applications
Powder premixes
Evaluate blending of dry ingredients while checking density differences and fill level.
Damp material blending
Trial suitable moist powders or pastes and observe adhesion, load and ease of discharge.
Formulation development
Compare recipes under matched mixing time and loading while recording cleaning needs between batches.
Evaluating results
Mixture uniformity
Take samples from different vessel locations to check whether the ingredients are distributed adequately.
Residual material
Inspect the trough and paddle after discharge to quantify hold-up and identify cleaning requirements.
Operating load
Observe mixing behavior with the actual moisture and viscosity rather than extending dry-powder results to all mixtures.
These are evaluation points for a sample trial, not measured results for a specific sample. Confirm performance under your actual operating conditions.
How it works

Batch charging
Place the ingredients in the trough within the selected model’s permitted working load.
Paddle movement
Rotation of the through-shaft paddle transfers and folds material through the batch.
Discharge
After mixing and stopping, empty the trough using the specified manual or powered arrangement.
Construction and configuration

Trough vessel
The horizontal container holds the batch and provides access for loading and cleaning.
Through-shaft paddle
The paddle assembly creates the mixing action; inspect contact surfaces and clearances as instructed.
Tipping mechanism
The listed range includes different discharge drives, so match the mechanism to the selected CH model.
More product images


Technical specifications
Compare the listed specifications and configurations. Scroll horizontally to view the complete table.
Specification table 1
| Model | CH10 | CH50 | CH100 | CH200 | CH300 |
|---|---|---|---|---|---|
| Working volume (L) | 10 | 50 | 100 | 200 | 300 |
| Spindle speed (r/min) | 24 | 24 | 24 | 24 | 24 |
| Mixing time (min) | 5~20 | 5~20 | 5~20 | 5~20 | 5~20 |
| Main motor power (kw) | 0.25 | 1.1 | 2.2 | 4 | 5.5 |
| Discharging motor power (kw) | with hands | 0.75 | 0.75 | 0.75 | 1.1 |
| Mechanical weight (kg) | 40 | 200 | 250 | 520 | 520 |
| Overall dimensions (mm) | 600*280*450 | 980*420*800 | 1100*440*900 | 1400*600*1200 | 1850*700*1200 |
Confirm the selected model, power supply, contact materials and operating conditions before ordering. Performance depends on the material and process.
