Product features
Screen selection
Replaceable screens provide different apertures for evaluating the discharge from a compatible dry material.
Stainless steel contact parts
The described hopper, chamber and working components use stainless steel for suitable material-contact requirements.
Adjustable feeding
The feed adjustment supports a controlled material supply and helps the operator avoid overloading the crushing chamber.
Cleaning access
An opening casing gives access to the chamber for screen changes, inspection and cleaning between compatible batches.
Applications
Dry chemical powders
Prepare suitable chemical feed within the selected model limits and confirm contact-material and collection compatibility.
Food-ingredient preparation
Evaluate compatible dry ingredients with a cleaning procedure and product-contact configuration appropriate to the intended process.
Laboratory material trials
Compare screen apertures and feed rates for a representative dry material before selecting an operating condition.
Evaluating results
Sieve fineness
Check the collected powder with an appropriate sieve analysis rather than assuming aperture alone determines the distribution.
Temperature rise
Observe the material temperature and signs of sticking during the trial, especially for heat-sensitive feed.
Collection balance
Compare input and collected mass and inspect the screen and chamber for retained material after processing.
These are evaluation points for a sample trial, not measured results for a specific sample. Confirm performance under your actual operating conditions.
How it works

Meter the material
Feed suitable dry material evenly into the chamber within the chosen model's starting-particle-size limit.
Apply relative motion
Moving and fixed toothed components create impact and friction, while particles also interact inside the chamber.
Screen and collect
Processed material passes through the fitted screen and enters the selected collection arrangement for recovery.
Construction and configuration

Replaceable screen
Choose the aperture for the intended powder and inspect it for damage or blockage before each run.
Separated bearing seat
The described bearing arrangement is separated from the crushing cavity to support access and cleaning.
Dust-collection configuration
Confirm whether the selected machine includes the fan, filter and collection equipment required by the application.
More product images

Technical specifications
Compare the listed specifications and configurations. Scroll horizontally to view the complete table.
Specification table 1
| NameModel | Spindle speed (r/min) | Host motor power (kw) | Induced air into the machine motor power (kw) | Feed particle size (mm) | Grinding fineness (adjustable) mesh | Crushing ability kg/h | Weight (kg) | Product size (length*width*height)MM |
|---|---|---|---|---|---|---|---|---|
| MF-20 | 6800 | 0.55 | 1.1 | <6 | 60-220 | 10-50 | 250 | 550*600*1250 |
| MF-30 | 5300 | 0.55 | 1.5 | <6 | 60-220 | 30-80 | 350 | 600*750*1450 |
| MF-40 | 4500 | 0.75 | 2.2 | <10 | 60-220 | 40-120 | 450 | 750*900*1600 |
Confirm the selected model, power supply, contact materials and operating conditions before ordering. Performance depends on the material and process.
